Viper-Custom – 7.4kw Type 2 EV Charging Cable – Tethered - Multiple Colour and Lengths Available
Multibuy discounts calculated at checkout
- VIPER EV – Bare-End (wall box) to Type 2 (car)
- Single Phase up to 32amps (7.4kW)
- Replacement cable for Tethered EV wall chargers
- Lengths from 25cm to 25m available
- Multiple colour variations
- Complimentary canvas carry bag included
- UKCA & CE Certified
- Made to Order, allow 5-7 days for UK delivery
- VIPER EV – Bare-End (wall box) to Type 2 (car)
- Single Phase up to 32amps (7.4kW)
- Replacement cable for Tethered EV wall chargers
- Lengths from 25cm to 25m available
- Multiple colour variations
- Complimentary canvas carry bag included
- UKCA & CE Certified
- Made to Order, allow 5-7 days for UK delivery
Take Charge of connecting your EV to the grid with our ‘Viper-Custom’ EV charging cables. Customise the length and colour you need using the drop-down menus above. Our ‘Remix-Braiding’ is resistant to chemical degradation, UV radiation, abrasion, and is available in a vast array of head-turning colours. Exclusively available at VIPER-EV.
This Domestic Type2 EV charging cable is assembled in Nottingham UK and meets all international standards. This cable has a Type 2 EV connector at one side only (vehicle connector). They should only be used as direct replacements for ‘Tethered’ EV wall chargers. Reasons for replacing could be either a damaged cable, or to increase the length of the supplied cable, extending the reach of your wall charging point.
Viper-Custom cables are Made to Order, so please allow 5-7 days for delivery within the UK. Please allow 5 days for dispatch if ordering from outside of the UK.
Please Note. These are not compatible with ‘Tesla Gen 3 Wall Connector’ charge-points
Features
- Made in Nottingham UK
- Choose from 25cm to 25m cable length
- Compatible with integrated car & Charge-Point locking mechanisms
- Single Phase up to 32amps (7.4kW) @ 230v/240v
- Flexible and UV stable cable
- Integral cable strain relief for maximum durability
- Resin filled connectors eliminate water ingress and offer unrivalled cable retention
- Viper-Remix Braiding is resistant to chemical degradation, UV radiation, and abrasion
- Cable and connector can withstand being run over
- Complimentary canvas carry bag included
Standards
- Type 2 connectors. According to IEC 62196-2
- H07BZ5-F Cable. 3core 6mm² (L,N,E) + 0.5 mm² (CP). According to IEC 62893
- Assembly and Testing. According to IEC 62196-1
- IP Protection Class: IP55 when connected
- Viper-Remix Braiding is FMVSS 302 Approved
- UKCA & CE Certified
Technical Specification
- Connector housing: Thermoplastic
- Max 32amp Rated (7.4kW)
- Operating Temperature: -30℃ to +50℃
- Bare copper ends are supplied ferruled and marked for easy identification and wiring
- Cable and connector can be run over, tested to 2500kg (2.5 tons) on concrete with only superficial damage
- Viper-Remix Braiding is Halogen Free, no toxic or corrosive gases are released in a fire
Delivery Speed | Made to Order - 7 Days MAX on delivery |
---|---|
Cable Brand | VIPER |