Sleek and affordable Audiophile grade mains cables, made with quality components and by skilled technicians.
A high quality screened mains cable for use in audiophile AV systems and recording studios. There are no smoke and mirrors in these cables, just a well designed product made with quality components and without all of the hype.
We have used LAPP 1.5mm CSA copper mains cable with a braided overall screen made of tinned copper. The screen is connected to ground at the plug only. This ensures that any interference collected is fed away from the system.
Masterplug UK 3 pin plug. The plug pins are electroplated in Nickel to give a silver effect. The C13 socket is locking type, they push straight on and then bind to the input pins. The connector is released by pulling the red tabs. The lead is rated at 13 amps max.
Braided in Techflex for durability and aesthetics. FLEXO PET REMIX (PTM) is braided from 10 mil polyethylene terephthalate (PET) monofilament yarns. The material has a wide operating temperature range, resists chemical degradation, UV damage, and abrasion.
LAPP ÖLFLEX® Screened PVC control cable (3x1.5mm, 15amp)
Locking IEC C13
Masterplug 3 Pin UK Plug, Nickel Plated
All conductor ends are ferruled
The cables are manufactured in the UK at our Nottingham facility and tested by qualified technicians.
More Information
Delivery Speed
Made to Order - Next Day Delivery Available
Cable Conductor
3 x 1.5mm Fine-wire strand made of bare copper wires. PVC insulation LAPP P8/1
Cable Screening
Tinned-copper braiding
Cable Jacket
PVC outer sheath. Techflex, FLEXO PET REMIX (PTM) Braiding