14 way Switched IEC Power Outlet. 1u Steel Rack Enclosure
Multibuy discounts calculated at checkout
- Buy 5 for £302.81 each and save 5%
- Buy 10 for £286.88 each and save 10%
- Buy 15 for £270.94 each and save 15%
- Buy 20 for £255.00 each and save 20%
A 1u switched IEC outlet panel, made my designacable! These integrate seamlessly into any 19" studio rack, allowing you to easily switch on the connected devices, and power down at the end of a session. Cable spaghetti is the nemesis of any engineer, this device will help to keep your studio organised and stress free!
A 1u switched IEC outlet panel, made my designacable! These integrate seamlessly into any 19" studio rack, allowing you to easily switch on the connected devices, and power down at the end of a session. Cable spaghetti is the nemesis of any engineer, this device will help to keep your studio organised and stress free!
We designed this unit for use in studios to power (and switch) low power devices. The unit has a max rating of 10amps, spread across all 14 outputs. This is plenty of power when considering the power consumption of synthesisers and rack gear such as compressors, gates, effects etc. There is a 10amp Thermal Cut-off switch on the front of the unit, this also acts as an overall on/off switch. If you exceed 10 amps this switch will activate, to protect the device, and temporarily switch of the unit. It can be reset by switching off to on.
Each output on the rear is switched on/off from the corresponding rocker switch on the front of the unit.
- Labelling ID strip provided
- 3mm steel housing
- 10amp MAX thermal cut-off switch
- 1x 10amp IEC Mains Input
- 14 x Switched 10amp IEC outlets
- Supplied with a 3m premium quality UK Plug to C13 power lead
Delivery Speed | Made to Order - 14 Days MAX on delivery |
---|---|
Connection Type | IEC Plugs & Sockets |
Current Rating | 10 amps |
Voltage Rating | 230-240v |